REVERSE Seatswitch Type 1 - Saddle Angle Adjuster

The Next Game Changer for E-Bikes

Climb like never before... First, we had the dropper post, now we have the SeatSwitch.
The SeatSwitch is a saddle angle adjuster for dropper posts, enabling you to ride with more traction, comfort, and control than ever before.

Using the lever, you can adjust your saddle angle by 6 degrees, lowering the saddle nose by 14 mm (depending on your saddle model),
or, depending on the basic installation, also raises.

This puts you in the optimal climbing position: perfectly balanced and with reduced pressure on critical areas. You ll climb faster and for longer -- with less pain and greater control.

Adjusting the saddle angle for climbing provides many benefits:

- Increased comfort on long rides.
- A more forward tilt of the pelvis for improved riding posture.
- Better weight distribution between handlebars and saddle when climbing.
- Enhanced technical climbing capabilities.
- Increased rear-wheel traction during uphill climbs.

Note: Ensure your saddle has sufficient build height between the rails and the saddle base. A minimum of 25 mm is required (measured from the saddle rail center to the saddle underside)! Currently, only round saddle rails (Ø7mm) are supported, not oval rails. Adapter for oval rails in process!

Specifications:

- Weight: 200 g (+/- 5% tolerance) (realistic weight increase: Seatswitch weight minus weight of the upper and lower saddle bracket of the seat post (on average approx. 65g))
- Dropper post mount: Type 1 (compatibility list) / Additional shim available
- Build height: +23 mm
- Minimum distance (saddle rail center to underside): 25 mm
- Angle adjustment: 2 positions (depending on installation: either -6°/Neutral or Neutral/+6°)
- Secure saddle clamping: Two-bolt design
- Material: Aluminum / Steel